Crown Broadcast FME 350W to 2000W User Manual– 05/2013
Page 82
Crown Broadcast, a division of International Radio & Electronics Corporation 25166 Leer Drive, Elkhart, Indiana, 46514-5425 USA
Ph +1 (574) 262 8900
When connected, the unit information is automatically updated.
With a serial connection, if the module is password protected, you will need to
enter the password before you can access all the functions.
7.2.2. Configuration
Once connected, click the “Start” button to retrieve RF values and
thresholds on the main page.
These values are also available with the TX Parameters front panel menu
or with the TX and CONF serial commands.
Values that can be set are followed by the button
. Click this button
after having updated a value to send it to the transmitter.
A set of buttons give access to other parameters. Click on one of them to
open a window displaying associated parameters.
As long as the application is in “Start” mode, current values are retrieved
for all open windows.
Clicking “Stop” prevents retrieval of data. However, sending data to the
module remains possible.
