Crown Broadcast FME 350W to 2000W User Manual– 05/2013
Page 70
Crown Broadcast, a division of International Radio & Electronics Corporation 25166 Leer Drive, Elkhart, Indiana, 46514-5425 USA
Ph +1 (574) 262 8900
6.2.3. Configuration
commands
NAME
Access
(R/W)
Possible value on the serial
port of the unit
Comments
CONF.10M.OPE R/W
"AUTO
or
"MANU"
Indicates the operating mode of the external
10 MHz input
CONF.AGC.ATT R/W [0…32000]
Attack in dB/s
CONF.AGC.DRIVE R/W [-320,00…320.00]
Drive applied before the AGC
CONF.AGC.REL R/W [0…50,00]
Release in dB/s
CONF.AGC.STATE R/W
ON/OFF
Enables/disables the AGC function on
Line1, Line2 and Player
CONF.AGC.THR R/W [-70,00…0]
Sets the non-triggering threshold in dB
CONF.AMB.MAX R/W [0..999]
Sets the triggering threshold for the ambient
temperature alarm
CONF.CROSSFADE
R/W
0 to 25.5
Crossfade between channels (in seconds)
CONF.DEV.AUDIO R/W
0…150 Sets
the
audio
excursion
CONF.DEV.CLIP R/W 0
to
200
Set the excursion clipping ; +128 = disabled
limitation
CONF.DEV.LIMIT R/W 0
to
200
Set the MPX excursion limitation; +128 =
disabled limitation
CONF.DEV.MPX
R/W
00000 à 150.00
Sets the MPX excursion
CONF.DEV.MPXPWR R/W
-12.7…12.7
Set the MPX power limitation; +128 =
disabled limitation
CONF.DEV.PILOT
R/W
0 to 25.5
Sets the pilot excursion
CONF.DEV.RDS
R/W
0 to 25.5
Sets the RDS excursion
CONF.DEV.SCA
R/W
0 to 25.5
Sets the SCA excursion
CONF.DRIVE.LIMIT
R/W 0
to
25.5
Drive value of the FM limiter in dB
CONF.HEAT.MAX R/W
[0..125]
Sets the triggering threshold for the radiator
1 temperature alarm
CONF.MODE
R
"LOCAL" or "REMOTE"
Indicates the mode, local or remote
CONF.PHASE.PILOT
R/W
-180..+180
Sets the pilot phase
CONF.PHASE.RDS R/W
-180..+180 Sets
the
RDS
phase
CONF.RF
R/W
ON/OFF
Enables/disables the RF
CONF.SBY
R
"ON" or "OFF"
Indicates if the transmitter is in standby
mode
CONF.STATE.CLIP
R/W
ON/OFF
Enables/disables the Hard Clipper
CONF.STATE.LIMIT
R/W
ON/OFF
Enables/disables the FM limiter
CONF.STATE.MPXPWR
R/W
ON/OFF
Enables/disables the MPX Power limiter
