Crown Broadcast FME 350W to 2000W User Manual– 05/2013
Page 27
Crown Broadcast, a division of International Radio & Electronics Corporation 25166 Leer Drive, Elkhart, Indiana, 46514-5425 USA
Ph +1 (574) 262 8900
4.3.
Using the PC application
4.3.1. Connecting with the control software application
1. On the PC, start the control software. This is a set-up tool that will allow you to quickly set and test your
transmitter. It is available on the supplied CD.
On the transmitter’s page, click the control interface link to download the zipped file to your PC.
Extract the .exe file. You do not need to install it: simply double-click on ENGI_REV_xxx.exe to
launch the application.
2. Select the serial port connected to the Crown Broadcast transmitter and the port speed (9600 for the
front panel connector).
4.3.2. Setting the transmitter
1. Set the power (in W), the frequency (in MHz) and enable the
RF.
2. To send a parameter value to the transmitter, click the login
button; no password is set in the factory. Click the
button to the right of the text zone.
3. A set of buttons give access to other parameters. Click on
one of them to open a window displaying associated
parameters. The “Audio Input” and “Modulator” windows will
enable input and MPX configuration.
4.3.3. Input
selection
The input can be set to:
Line1 for the analog inputs (see sections 4.3.4 to 4.3.6)
Line2 for the AES (see sections 4.3.4 to 4.3.6)
MPX1 and MPX2 inputs (see sections 4.3.3 and 4.3.6)
Internal generator
