Crown Broadcast FME 350W to 2000W User Manual– 05/2013
Page 29
Crown Broadcast, a division of International Radio & Electronics Corporation 25166 Leer Drive, Elkhart, Indiana, 46514-5425 USA
Ph +1 (574) 262 8900
4.4.
With the TCP/IP option
4.4.1. Network configuration
If the optional IP board is present on the transmitter, first set the IP address with the front panel:
9 8 . 0 0 M H z
0 W
From the main screen, press the "Enter” key to display
menus and then the “+” key until you see the Network
menu.
9 8 . 0 0 M H z
1 0 0 W
-> N E T W O R K >
1
N E T W O R K -> A D R
-> 1 9 2 . 1 6 8 . 0 1 2 . 1 0 3
1
N E T W O R K -> M A S K
-> 2 5 5 . 2 5 5 . 2 5 5 . 0 0 0
Once you see this screen, press “Enter”.
The IP address screen is displayed. Press “Enter” to
switch to edit mode. Use the “+” and “–” keys to adjust
values and the “Enter” key to confirm.
Press the “+” key to display the Netmask and modify it if
needed. Press the “Enter” key to confirm.
4.4.2. Connecting to the web interface
Now the transmitter is set. Connect it to the network.
Open a web browser (Google Chrome, Mozilla Firefox …) and enter in the address bar the transmitter’s
IP address such as it was set above.
Select the language if necessary.
Enter the user name and password (default:
Admin
/
admin
).
You can now access the web interface.
