© 2022 All rights reserved. Data subject to change without notice.
49
Rev. B | 2022.03
LPT-M - Operation Manual
6.10 Test Functions
6.10.1 Test Audible (Buzzer)
NOTE:
Before testing the audible alarm/sounding the buzzer, warn people in the
vicinity of the sound so unnecessary distress or response is not caused.
In the Hardware Configuration Menu (passcode 1001), press either ARROW to
scroll through the menu and select Program Audible. Press ENTER and use the
ARROW keys to scroll through the menu and select Audible Test. Press ENTER
and use the ARROW keys to increase or decrease the number of seconds. You
can enter a maximum number of 9999 seconds (2.7 hours).
Move to the next digit by pressing ENTER. When finished, press ENTER to save
and Exit. The test will start immediately and will continue for as long as the
time was set. The remaining time of the test can be seen counting down on the
display. You can exit the menu without affecting the time.
If you want to end
the test before the time is up, you must re-enter the Test Mode and enter a
value of “0000” for the test length of that function.
6.10.2 Test Relay
NOTE:
Before testing the relay, notify the appropriate people so unnecessary
distress or response is not caused.
In the Hardware Configuration Menu (passcode 1001), press either ARROW to
scroll through the menu and select Program Relay. Press ENTER and use the
ARROW keys to scroll through the menu and select Relay Test. Press ENTER
and use the ARROW keys to increase or decrease the number of seconds. You
can enter a maximum number of 9999 seconds (2.7 hours).
