© 2022 All rights reserved. Data subject to change without notice.
39
Rev. B | 2022.03
LPT-M - Operation Manual
If the LPT-M is part of a system, such connected to a QCC or FCS, each gas
channel splash screen will show the current status of the channel:
• OK - gas channel is operating normally
• LOW - gas channel is in low alarm
• MID - gas channel is in mid alarm
• HIGH - gas channel is in high alarm
• FAULT - gas channel is in fault
• COMM - controller has been unable to communicate with the
LPT-for at least 300 seconds
NOTE:
If the LPT-M is being used as a standalone system (not connected to a
controller), the COMM status does not apply.
Using the magnetic wand (or buttons inside the enclosure) you can scroll
through the other splash screens that show the devices’ serial number,
Modbus® ID setting and current sensor temperature reading.