2
TABLE OF CONTENTS
Pre-Installation Considerations….………...……...………………………………………………………………..….………..2
Installation Cautions & Warnings………………………………………………………………………………..….....……..…3
6 Pin Power Plug Wiring………………………………………..………………………………………………………………..3
Parking Light Wiring…………………..………………………………………………………………..………………………...4
12 Pin Low Current Plug Wiring……….………….………………………………...…………………….….……..………..5-7
Power Door Lock Wiring...…………………………………….…………….……..…………...….…………..…..………....8-9
Smart Tachless and Tach Finder Mode………………………………….…………………..…..…….…......……….…10-11
Tach Programming……..…..…….…………………………………………………………………………....….…...............12
Diesel Glow Plug Delay..………………….……………………………...……………………...…..…………..…….………13
Option Programming Table………. …….………….……………………………..……………..…….....….….....……..13-15
Option Descriptions……………..……………………………...………….……….……..…………………………..……16-20
Antenna Diagram……………………….…………………………………………………………..………………………..….20
Transmitter Programming / 2 Vehicle Programming………………………….….…………..………...…..…..……..........21
Manual Transmission Mode……………………….………………………………...…………………….….……..…………22
Wiring Diagram…………………………..…………………………..………………………………..………..….……….…..23
Remote Start Diagnostics.…………….…………………………………………………………..………………………..…..24
Data Port………..……………………….…………………………………………………………..………………………..….24
PRE-INSTALLATION CONSIDERATIONS
BEFORE BEGINNING
, check all vehicle manufacturer cautions and warnings regarding electrical service (AIR BAGS, ABS
BRAKES, ENGINE / BODY COMPUTER AND BATTERY).
PLAN OUT YOUR INSTALLATION
and determine most suitable locations for all components to be placed. These components
include: the module itself, valet/program button, possible relays, and antenna/receiver (LC-1, LC-3, LC-4 and LC-7 only, the LC-
00 model does not include antenna or remotes.) Allow enough wire to create a service loop with strain relief, should servicing be
required. This will also allow easier access and mounting.
DAMAGE to the CoolStart unit
resulting from incorrect installation or failure to follow guidelines stated in this book will not be
covered under warranty and will be subject to repair or replacement charges.
USE A VOLT OHM METER
to test and locate all connections. Test Lights can damage a vehicle’s computer systems.
ADDITIONAL PARTS
, which are not included with this unit, may be needed for your particular vehicle. These items may include
extra relays or Anti-Theft System Bypass modules.
