14
OPTION PROGRAMMING
To Engage Option Programming:
1.
Turn Ignition Key to the ON position. Do not start vehicle.
2. Press the Program / Valet button 5 times. Wait for the unit to flash the lights and/or horn honk 5 times.
3. Push the valet program button the number of times that corresponds to the option number desired (1-26X). You
must get a light flash and/or honk after each button press. If the system did not flash the lights and/or honk, then it
did not register your press. Press carefully and do not lose count.
4.
For LC-3, LC-4, LC-7:
When you reach the desired option #, to change the option: Press button #1
Lock
,
#2
Unlock, #3 Trunk, #4 Start.
(Some option numbers use ALL 4 remote buttons to select settings)
5.
For LC-00, LC-1:
(No Lock button) Tap the brake pedal to toggle through the option values: Tap brake once
(lights flash 1X) Tap the brake pedal again (Lights flash 2X) tap 3 or 4 times for options that have 3 or 4 values.
6. When finished, turn Ignition OFF, and check for changed features.
OPTION PROGRAMMING TABLE
Option #
Option Description
TX Button #1
(Lock)
TX Button #2
Default Value
TX Button #3
(Trunk)
TX Button #4
(Start)
1
Engine Monitoring
Tach
*Tachless*
Hybrid
2
Autolock with RPM / Ignition
ON
*OFF*
3
Door Lock Pulse
3 Seconds
*0.50 Seconds*
Double Unlock
“Wake Up” pulse
with Unlock
4
Pink/white Wire Selection
ACC
*IGN*
START
5
Data Port Protocol
ADS iDatalink -
OFA Series
*Fortin -
EVO / SL Series*
6
Remote Start & Trunk Release
Button Selection
Double Button Press
*½ Second Press*
Press and Hold
7
Horn Chirps on Remote Start
ON
*OFF*
8
Lock with Remote Start / Abort
OFF
*Lock after
Remote Start*
Lock after Remote
Start / Arm OEM
Alarm with Abort
Lock / Arm OEM
Alarm with Abort
