Crestron e-Control, Справочное руководство

Страница: 23 / 74

Crestron e-Control
®
Software
dash (hyphen character). No other characters are valid. The hostname cannot
begin with a dash or number.
3. The IP address of the default router is provided by the DHCP server and thus
the Default Router field should be left blank.
4. If applicable, enter the domain in the Domain field. This is only necessary if
you are configuring DHCP on an Ethernet connection to a control system
that currently has a static address. The domain name will be used to
reconnect to the control system after it reboots. With a serial connection, the
domain does not need to be entered.
Note that the domain supplied by the DHCP server will overwrite the domain
that is indicated in this field.
Advanced Settings (optional):
1. Click the Advanced button to set optional parameters. You can enter the IP
address of the primary DNS server in the DNS Server 1 field; enter the IP
address of the secondary DNS Server in field 2.
If the DHCP server provides the address for the DNS server, it is not
necessary to enter these values. Here the DNS server addresses will
automatically be filled in.
2. You have the option to change the CIP and CTP port numbers in rare cases
where a network conflict may exist with ports 41794 and 41795.
The Web port can be changed for security reasons if no firewall or router is
Reference Guide – DOC. 6052 Crestron e-Control®
•
19