Crestron e-Control, Справочное руководство

Страница: 42 / 74

Software Crestron e-Control
®
standalone executable. Use the control system’s built-in “hardware” gateway
(127.0.0.1).
When you compile the project, VT Pro-e will generates an .exe program file and other
associated files and saves them in a folder with the project name and an .xexe
extension. You have to transfer this folder and all its contents to the user’s machine.
You can save the XEXE folder in any directory, and you can create a shortcut to the
EXE file from the Windows desktop, as you would with any program.
After you transfer the program files, launch the executable on the user’s machine. This
will open the e-Control 2 screen and display the message: “The connection to
hardware was not established.” Click
Settings on the Options menu and enter the IP
address or fully-qualified domain name of the control system. Then refresh the page
by clicking
Restart on the File menu, or pressing the F5 key.
Gateway Configurations
In the configuration shown below, the PC containing the standalone executable
connects to the “hardware” gateway that is built into the 2-Series processor. This
scenario does not require the licensed CNX-EGWY.
192.168.1.XXX Ethernet Network
TCP
TCP
Controlled Devices
Control System/Gateway (192.168.1.9)
PC Interface Symbol: IP ID 04, IP Address 127.0.0.1
CIP
Windows PC
XPANEL.exe (IP ID 04, IP Address 192.168.1.9)
38
•
Crestron e-Control® Reference Guide – DOC. 6052