Crestron
e-Control
®
Software
Other configurations are possible. In the setup shown below, the gateway is the
“hardware” gateway that is built into the Ethernet card on the control system. Here
each ActiveCNX control calls the Connect( ) method to start a TCP/IP connection to
the control system. The e-Control gateway receives the packets and performs the
translation to CIP.
PC (192.168.1.3)
ActiveCNX Control -- Connect (IP Address 192.168.1.7, IP ID 05)
192.168.1.XXX Ethernet Network
Control System/Gateway (192.168.1.7)
ActiveCNX Interface (IP Address: 127.0.0.1 IP ID 05)
ActiveCNX Interface (IP Address: 127.0.0.1 IP ID 08)
PC (192.168.1.9)
ActiveCNX Control -- Connect (IP Address 192.168.1.7, IP ID 08)
TCP/IP
TCP/IP
CIP
TCP/IP
Controlled Devices
Reference Guide – DOC. 6052
Crestron e-Control®
•
43
Содержание e-Control
