Software
Crestron
e-Control
®
In the configuration shown below, the CNX-EGWY resides on a PC that acts as a
server to the other PCs.
PC (192.168.1.3)
ActiveCNX Control
Connect (IP Address 192.168.1.7, IP ID 06)
192.168.1.XXX Ethernet Network
Control System (192.168.1.7)
ActiveCNX Interface (IP Address: 192.168.1.9, IP ID 06)
ActiveCNX Interface (IP Address: 192.168.1.9, IP ID 07)
CIP
Controlled Devices
PC (192.168.1.4)
ActiveCNX Control
Connect (IP Address 192.168.1.7, IP ID 07)
PC/CNX Gateway (192.168.1.9)
CIP
TCP/IP
TCP/IP
The ActiveCNX control can also communicate directly with a CEN device. In this
configuration, the CNX-EGWY is required, since the CEN device does not provide an
internal “hardware” gateway.
CEN-TVAV (192.168.1.4)
IP Table Entry: IP Address 192.168.1.100, IP ID 08, Set as Master = True
PC/CNX Gateway (192.168.1.100)
ActiveCNX Control -- Connect (IP Address 192.168.1.4, IP ID 08)
192.168.1.XXX Ethernet Network
TCP/IP
CIP
CIP
44
•
Crestron e-Control®
Reference Guide – DOC. 6052
Содержание e-Control
