Software
Crestron
e-Control
®
IP Table Setup
The
IP Table
is an internal list that enables the control system to identify and
communicate with Crestron Ethernet equipment on an IP network.
The IP Table consists of each unit’s IP address or fully-qualified domain name,
together with its IP ID. The IP ID is a hexadecimal value that must be unique and
ranges from 03 to FF.
Each controlled Ethernet device also has an IP Table, called a Master List. Here you
must set the IP ID of the controlled device and then specify the IP address or FQDN of
the control system(s) that will send it commands.
You can enter information into the IP Table in two ways. The first method creates
what is referred to as a “default” IP Table, as follows:
1.
For Ethernet Remote Processing and TPS Panels
: Double-click the
Ethernet remote processor or TPS panel in the SIMPL™ Windows
Configuration Manager screen to open the
Device Settings
dialog box.
2. Click
the
IP Net Address
tab.
3. Click
the
IP ID
button and select the hexadecimal IP ID from the list.
(The “Remap IP ID at program upload” option is reserved for future use.)
4. Click
Use Hostname
and enter the fully-qualified domain name of the
remote Ethernet processor or TPS touchpanel.
5.
For Generic Ethernet Modules
: The device settings for Generic Ethernet
modules such as the ActiveCNX Interface and e-Control PC Interface are the
same regardless of the DHCP setting.
That is, the IP address should be set to 127.0.0.1 if the internal “hardware”
26
•
Crestron e-Control®
Reference Guide – DOC. 6052
Содержание e-Control
