Crestron e-Control, Справочное руководство

Страница: 64 / 74

Software Crestron e-Control
®
Appendix D: Web Server Console Commands
PRO2 Help options for Ethernet
PRO2>help ether
ADDMaster
Add a “master” entry to IP table.
ADDPortmap Add a port map to the NAT table.
CIPPORT Set port number for CIP.
CTPPORT Set port number for CTP (console).
DEFRouter Set default router.
ESTatus Display the status of the Ethernet.
ETHERNET Enable/disable Ethernet.
ETHERTEST Start Ethernet test.
HOSTname Set the host name for DNS environment.
IPAddress Set IP address.
IPMask Set IP subnet mask.
IPTable Display IP table.
KILLSOCKET Cancel an active TCP console socket.
NATENAble
Enable/disable Network Address Translator (NAT).
NATREMote Enable/disable NAT Remote Config.
PING Ping remote node.
REMMaster Remove an entry from IP table.
REMPortmap Remove a port map from the NAT table.
SHOWPORTMAP Display the current portmaps for the NAT.
WEBSERVer
Enable/disable Webserver.
WEBINIT Initialize Webserver default file.
WEBPORT Set port number for Webserver.
WHO Generate a report of the Ethernet consoles.
X-Series/ Help options for Ethernet
*X-Series processors with a card must have 51263 ops to control the web
port interface.
Version 5.12.63-x 11/14/2001
__? Dir
_MAC_Adr Free
IP_Adr Del
IP_Mask Initialize
IP_MTU Xputfile
Def_router Type
Password Test1
Ver
Info
To change web port:
Restart [ESC]x’web[SPACE]”newport #”[ENTER]
then
Web reboot
LimitWeb
60
•
Crestron e-Control® Reference Guide – DOC. 6052