15
Peristaltic Pumps Series IP 100-800
safe home or parking position before starting
work.
Take care when handling hazardous (caustic,
harmful) fluids.
•
Always wear your personal protective outfit
(e.g. gloves, goggles, tight fitting clothes).
•
In case of skin contact, inhalation of harmful
vapours or eye injury you should
immediately contact a physician.
2.7.3 Regulations and instructions on
lubrication
(Only of relevance if the pump is equipped with
a lubrication system)
Lubrication work must only be carried out by
authorized personnel. The professional
execution of this work must be examined and
approved by a highly skilled ”Inspector”.
Unauthorized persons must not be permitted to
work on machines or units or in their vicinity.
Lubricants and oils must not come in contact
with open flames or glowing parts.
When working on assemblies and components
(e.g. motor, gearbox) you must also consider
the specific instructions and lubrication
instructions for these assemblies and
components.
The complete system must generally be
switched off and secured against unintended
and unauthorized restarting before starting
lubrication work.
(Exception: Lubrication work that can only be
performed when the system is running).
As a measure to avoid injury all lubrication work
should only be carried out using permitted and
appropriate tools and working aids.
Rotating or mobile parts must be shut down and
reliably secured against restarting before
starting work.
Do not touch rotating parts and always keep a
safe distance to avoid clothing or hair being
caught.
Strict cleanliness is of utmost importance during
initial filling and when topping up or changing
lubricant so that no foreign matter will enter
through the lubrication point.
Overflowing and spilling of oil must be avoided.
Wipe off excessive and emerging grease.
Avoid skin contact with oils and grease – wear
protective clothes.
With certain lubricants, e.g. flammable hydraulic
fluids, the special safety instructions for these
substances must be observed. (See notes on
packaging and instructions of manufacturer).
2.8
Noise
In a room with several pumps the noise level
may be very high. Depending on the sound
pressure level the following measures should be
applied:
below 70 dB(A):
No special measures
required
above 70 dB(A):
Persons who are
permanently in the room must
wear hearing protection.
above 85 dB(A):
Room with dangerous
noise level!
Each door must have a clearly noticeable
warning sign to warn persons from entering the
room without hearing protection.
Measured sound pressure level according to ISO
3746: < 75 dB(A)
Содержание ELRO IP 100
Страница 4: ...4 ...
