Trinity Lx Lx200-800 Скачать руководство пользователя

Страница: 1 / 24

Trinity Lx

Model Numbers: Lx200-800
Version Date: 2013-07-16

APPENDIX C - WATER HEATER APPLICATIONS:
PLUMBING AND WIRING INSTRUCTIONS

Optional Configuration: Refer to "Appendix B - Boiler Applications"
Companion Storage Products: TRIN & STOR Storage Tanks

TABLE OF CONTENTS

1.0

INTRODUCTION ................................................................................................................ 2

General Installation Requirements ....................................................................................... 2

Mandatory Wall Mounting Protection .................................................................................. 3

General Water Treatment ..................................................................................................... 3

Potable Water Systems ......................................................................................................... 3

Definitions of Potable Water Systems .................................................................................. 3

Safe Temperatures for Potable Water ................................................................................... 4

2.0

WATER HEATER SYSTEM PIPING ................................................................................. 6

Near Water Heater Plumbing................................................................................................ 6

Water Heater System Plumbing ............................................................................................ 8

Stand Alone Water Heater Applications ............................................................................. 10

Multiple Water Heater Applications ................................................................................... 12

3.0

FIELD WIRING ................................................................................................................. 15

Line Voltage Connections .................................................................................................. 15

Low Voltage Connections .................................................................................................. 18

HAZARD SYMBOLS AND DEFINITIONS

Danger Sign: Indicates a hazardous situation which, if not avoided, will
result in serious injury or death.

Warning Sign: Indicates a hazardous situation which, if not avoided,
could result in serious injury or death.

Caution Sign plus Safety Alert Symbol: Indicates a hazardous situation
which, if not avoided, could result in minor or moderate injury.

Caution Sign without Safety Alert Symbol: Indicates a hazardous
situation which, if not avoided, could result in property damage.

Notice Sign: Indicates a hazardous situation which, if not avoided,
could result in property damage.

This Water Heater must be installed by a licensed and trained Heating
Technician or the

Warranty is Void.

Failure to properly install this

unit may result in property damage, serious injury to occupants, or possibly death.

NTI # 86572

NEW FEATURES

20% Larger Screen

Tank Sensor Option

Optional BACnet Gateway

TRIN & STOR

Lx 200-800

Содержание Lx200-800

























Результаты поиска

Содержание Lx200-800

Отзывы:

Похожие инструкции для Lx200-800

Бренды по названию

Популярные бренды

Trinity Lx Lx200-800, Руководство пользователя

Результаты поиска

Содержание Lx200-800

Отзывы:

Похожие инструкции для Lx200-800

Бренды по названию

Популярные бренды