page 8
10. Glass Shade Installation.
Install 2 candelabra base 40 watt max. bulbs,
(included).
IMPORTANT
: When replacing bulbs, please
allow bulbs and glass shade to cool down
before touching.
Remove the 3 knobs (along with washers)
from bottom edge of light kit fitter.
Save
these knobs to secure glass shade.
Raise glass shade to light kit fitter and secure
glass shade with knobs and washers
previously removed.
Do NOT overtighten
knobs as glass may crack or break.
bulb
bulb
glass shade
knobs
diagram 1
diagram 2
diagram 3
diagram 4
reverse switch
fan
pull chain
extension
motor housing
light
pull chain
extension
light kit
fitter
11. Testing Your Fan.
It is recommended that you test fan before
finalizing installation. Restore power from circuit
box and wall switch (if applicable). Test fan speeds
with the pull chain labeled FAN located to the
right of the reverse switch. Start at the OFF
position (no blade movement). First pull will set
the fan to HI. Second pull will set the fan to
MEDIUM. Third pull will set the fan to LOW. Fourth
pull will re-set the fan to OFF setting. Test light
with the pull chain labeled LIGHT located to the
left of the reverse switch. (
Refer to
diagram 1
.
) If
fan and/or light do (does) not function, please
refer to "Troubleshooting" section to solve any
issues before contacting Customer Service.
Turn fan completely off
before
moving the reverse
switch (located on light kit fitter). Set reverse
switch to recirculate air depending on the season:
- LEFT position in summer (
diagram 2
)
- RIGHT position in winter (
diagram 3
)
A ceiling fan will allow you to raise your
thermostat setting in summer and lower your
thermostat setting in winter without feeling a
difference in your comfort.
Important
: Reverse switch must be set either
completely to the LEFT
or
completely to the RIGHT
for fan to function. If the reverse switch is set in
the
middle
position (
diagram 4
), fan will not
operate.
Attach pull chain extensions supplied or custom
pull chain extensions (sold separately) to the ends
of the pull chains.
