Page 18
1019068-C
WARNING: Add the wiring sleeves on this step to prevent PilotPro damage during testing.
INSTALLATION
Black
Black
Orange
Red
Brown
Green
50
57
STEP 7.
Plug main Wiring Harness (
57
) into the
Control Module (
50
).
NOTE: Plug the wiring harness into
place with the clip facing out as
illustrated here.
STEP 8.
Add the protective Wire Sleeves (
63
)
to both wires that extend from the Battery
Pack (
49
) and slide back the clear
insulation on both wires.
Connect the
red wire
from the Battery
Pack (
49
) and the
red wire
from the Wiring
Harness (
57
). Slide the Electrical Sleeve (
63
)
over the connection.
Connect the
black wire
from the Battery Pack (
49
) to
the
black wire
from the Wiring
Harness (
57
).
Slide the Electrical Sleeve (
63
)
over the connection.
Red
Wire
Red
Wire
49
57
63
Black
Wire
49
57
Black Wire
63
