Payne PG92SCS Product Data Download

Page: 1 / 16

Product Data

PG92SCS ALL

PG92SBS 048080 ONLY

CONDENSING GAS FURNACE

SERIES A

A11300

The model PG92SCS is an efficient and robust 4--way multipoise
condensing furnace with features including single--stage heating

and a rugged PSC Blower Motor. The PG92SCS builds on the
many Payne successes in the furnace industry and establishes a

new standard for all high--efficiency gas furnaces.

STANDARD FEATURES

Heating efficiency of 92.1% AFUE.

Direct--vent/sealed combustion, single--pipe venting or
ventilated combustion air.

PSC blower motor.

4--way multipoise furnace.

Hot surface ignition.

LED diagnostics and self test feature.

Stores fault codes during power outages.

Adjustable heating air temperature rise.

Adjustable cooling airflow.

Approved for Manufactured Housing/Mobile Home applications
with MH accessory kit.

Approved for Twinning applications (48060 through 60120
sizes, only).

Certified to leak 2% or less of nominal air conditioning CFM
delivered when pressurized to 1-inch water column with all
present air inlets, air outlets, and condensate drain port(s) sealed.

Use of the AHRI Certified

Mark indicates a

manufacturer’s participation in the program. For
verification of certification for individual products,
go to www.ahridirectory.org.

C E RT I F I E D

Summary of Contents for PG92SCS

















Search results

Summary of Contents for PG92SCS

Reviews:

Related manuals for PG92SCS

Brands by name

Popular brands

Payne PG92SCS, Product Data

Search results

Summary of Contents for PG92SCS

Reviews:

Related manuals for PG92SCS

Brands by name

Popular brands