Coyote CC2LP, Инструкция по использованию и уходу

Страница: 18 / 39

16
1. Attach Motor Bracket Assembly to the side of the barbecue frame (can be mounted on
either left or the right side of the frame) using two screws and two nuts.
2. Insert Rotisserie Motor onto Motor Bracket Assembly.
3. Assemble Key Washer, Counter-balance and handle to Spit Rod. Slide Shaft Collar with long end
towards handle.
4. Slide Prong Forks with the prongs facing away from the handle onto the Spit Rod. Place food on
to Spit Rod and secure with the second Prong Forks. Secure with thumbscrews. Place Spit Rod
assembly and position into Motor. Secure position with thumbscrew. It may be necessary to
secure any loose portions with butcher's string. Never use nylon or plastic string as it will melt
and ruin the food.
5. Once the food is secured, place the sharp end of the Spit Rod onto the motor, and then rest
the Spit Rod on the supports at either side of the grill.
6. Ensure that all Bolts are tightened securely.
7. When the rotisserie is being operated exclusively, it is strongly recommended that a pan be
placed on the grilling grids, beneath the food to catch the meat drippings. This will prevent
excessive build up of drippings on the grids and facilitate cleaning.
a) If your food is large and a pan will not fit on top of the grates, you can remove the cooking
grates and place your pan directly on the flavorizers.
i. The center of your spit rod to the top of the hood, equals the same distance from the
spit rod to the top of the flavorizers.
NOTE:
Close hood carefully and align Motor Bracket and Shaft Mounting Bracket so that Rotisserie
Rod is in between the hood openings.
No. Qty Description
1 1 110V Motor
No. Qty Description
1 1 110V Motor
2 1 Motor Bracket
3 1 Spit Rod
4 2 Shaft Collar
5 2 4-Prong Fork
6 1 Handle
7 1 Counterbalance
8 2 Screw
9 2 Hexagonal Head Screw
WARNING:
Never operate Rotisserie Burner with main (other) burner(s) “ON”. Warming Rack
must be removed when Rotisserie Burner is ON.
Electrical Grounding Instructions:
•
The rotisserie motor is equipped with a three-prong grounding plug for your protection against
electric shock. This plug must be inserted directly into a properly grounded three-prong
receptacle. Do not cut or remove the grounding prong from this plug.
•
The rotisserie motor must be electrically grounded in accordance with local codes or, in the
absence of local codes, in accordance with the
National Electrical Code, ANSI/NFPA 70-1990
or Canadian Electrical Code, CSA C22.1 .
•
Do not use an extension cord to supply power to your grill. Such use may result in fire,
electrical shock or other personal injury. Do not install a fuse in the neutral or ground circuit. A
fuse in the neutral or ground circuit may result in an electrical shock hazard. Do not ground this
appliance to a gas supply pipe or hot water pipe.