Coway CHP-671R/L, Руководство по обслуживанию, Страница: 9 / 74

Product installation
Coway co., Ltd 2-1
2. Product installation
2-1 Installation method
2-1-1 Precautions on installation
Precautions
• This purifier's tank capacity is suitable for business use.
• Install the product base so it is even and firmly in place.
• Do not install in direct sunlight, in places where the temperature drops below zero,
or in very humid places.
• Check the product manual again before reinstalling or moving the purifier.
• Only connect the power cord to the voltage rating that matches it on the rating
plate. Check the voltage before connecting the power cord to the wall outlet.
• The source water hose must be connected to a cold water pipe.
- The filter may be damaged if connected to hot water of 40 °C or hotter.
• Immediately after installation, dispose of at least two full tanks of stored water
while the storage tank is full before using the purifier.
• Use new filters only after washing. (During installation and A/S exchange)
- Plus sediment filter: Install after washing with source water for about
10 seconds.
- Pre-carbon filter: Install in reverse and install after washing with source water
for about 3 minutes.
- Membrane (RO) filter: Install the filtered water valve after washing with source
water for about 5 minutes.
- Nanotrap (R) filter: Install after washing with source water for about 3 minutes.
- Plus Inno-Sense filter: Install with no separate flushing.
- Plus Inno-Sense filter (D): Install with no separate flushing.
Installation
water pressure
• The source water pressure must be at least 138 kPa for the water volume and
water system to operate smoothly.
Installation
distance
• Source water pressure of 138 kPa or less: Install within a height of 3 m and a
distance of 5 m.
• Source water pressure of 138 kPa or more: Install within a height of 3 m and a
distance of 25 m.