Covaris LE220 Скачать руководство пользователя | Manualshive

Страница: 9 / 57

background image

Covaris

LE220 (-plus, R-plus, and Rsc) Setup & Instruction Manual

9

Part Number: 010398 Rev H | November 2019

2.2.2

The AutoFill option allows plant deionized water to be plumbed directly to the LE220R-plus and LE220-plus to allow automatic
filling of the water bath without any operator intervention. If the AutoFill option is going to be used, refer to the instructions
included with the AutoFill accessory kit or

Appendix D

of this manual to assemble the components of the AutoFill Accessory Kit, and

connect plant water to the system.

2.2.3

Plug the instrument into a power source using the enclosed line cord. The instrument is a “universal input” device and automatically
employs any worldwide line voltage or frequency (100 to 240 volts AC, 50 or 60 Hz). Leave the instrument power and notebook
power switched OFF at this time.

2.2.4

Plug one end of the USB cable into the instrument USB Port and the other end into any USB port on the notebook computer.

2.2.5

Connect the temperature control cable between the D-connector at the rear of the LE220-plus or LE220R-plus and the D-
connector on the CH05 chiller.

2.2.6

Connect the CH05 to a power source. The CH05 is a universal input device. Do not turn on the CH05 at this time.

2.2.7

Locate the WCS power supply and line cord. Connect the WCS power supply to the port provided on the WCS and connect the line
cord to a power source. The power supply is a universal input device. Leave the WCS turned off at this time.

2.2.8

Connect the computer to a power source. Connect the mouse or other accessories to the computer.

2.2.9

Refer to the rear of the instrument’s right-side panel and identify the following features as necessary:

The Rear Right Panel of the System

AC Line (Mains) Input

and Power Switch

USB Port

Serial Tag, Regulatory, and

Line Power Label

Product Safety Label

«
...
7
8
9
10
11
...
»

Содержание LE220


























































Отзывы:

Нет отзывов

Похожие инструкции для LE220

Бренд: 3M Страницы: 2

SafetuNet Alert

Бренд: Masimo Страницы: 2

Бренд: Bartscher Страницы: 28

Бренд: Bartscher Страницы: 13

Бренд: IBEX Страницы: 10

Бренд: M-system Страницы: 12

Бренд: Ognibene Страницы: 28

Бренд: Hameg Страницы: 24

Бренд: Vaisala Страницы: 118

Бренд: Nederman Страницы: 255

Бренд: Raytec Страницы: 60

LUNAQUA Classic LED

Бренд: Oase Страницы: 16

Бренд: Daekyung Страницы: 15

DependaBar DB-18-PCW

Бренд: Healthcraft Страницы: 13

Бренд: Harris Страницы: 21

Бренд: Erbe Страницы: 124

SAS-1 Immunofix

Бренд: helena BioSciences Страницы: 48

Бренд: Rainbow Colour Changers Страницы: 22

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды