COSMOGAS MYDENS 100T, Руководство по установке, использованию и обслуживанию, Страница: 32 / 94

3 2 60T - 280T
COSMOGAS
Figure 10-3 - 60T to 140T INAIL KIT
Figure 10-4 - 180T to 280T INAIL KIT
1 2
16
7
11
3
8 6 8
4
5
2 1
12
13
15
14
1 2
16
7
11
3
8 6 8
4
5
2 1
12
13
15
14
020014.01.011
13
6
10
14
2
16
1
11
12
7
5
4
15
1 2
3
020014.01.012
10.4 - Boiler INAIL safety devices
The appliance comes standard supplied without the INAIL
safety devices.
ATTENTION !!! All appliances over 35 kW of
output heat must, under the installer’s responsibility,
be equipped with safety devices as provided by Rule
“R” issued by the National Institute for Insurance
against Accidents at Work (INAIL).
ATTENTION !!! Installing shut-off elements
between the appliance and the safety valve (part “7” in
fig. 10-3 and “15” in figure 10-4) is prohibited.
To facilitate installation, COSMOGAS provides, on request ,
INAIL kits complete with the required devices and a special
pipe to install them.
Figure 10-3 shows the kit for the 60T, 70T, 100T, 115T and
140T models.
Figure 10-3 key
1 = Nipple
2 = Gasket
3 = Manifold
4 = Well for Valve probe “11”
5 = INAIL thermometer
6 = INAIL manometer
7 = INAIL safety valve
8 = Connection unit
11 = INAIL gas shut-off valve
12 = Inspection well
13 = INAIL safety thermostat
14 = INAIL safety pressure switch
15 = INAIL safety pressure switch
16 - Expansion tank connection fitting
ATTENTION !!! The valve sensor “11” (figure 10-
3) goes into the probe carrier well “4” and secured with
the specific anti-slip locking screw.
Figure 10-4 shows the kit for the 180T, 210T and 280T
models
Figure 10-4 key
1 = Fixing nuts and bolts
2 = Gasket
3 = INAIL safety pressure switch
4 = INAIL safety pressure switch
5 = Connection unit
6 = INAIL safety thermostat
7 = Manifold
10 = INAIL gas shut-off valve
11 = Well for Valve probe “10”
12 = Inspection well
13 - Expansion tank connection fitting
14 = INAIL manometer
15 = INAIL safety valve
16 = INAIL thermometer
ATTENTION !!! The valve sensor “10” (figure
10-4) goes into the probe carrier well “11” and secured
with the specific anti-slip locking screw.
10 - INSTALLATION - Hydraulic connections - boiler