Cosmed Quark CPET, Руководство пользователя

Страница: 57 / 102

System Cleaning & Maintenance - CPET & RMR Tests - 55

Cleaning and Disinfection Mmethods
Item Headgear Mask
When? Before first use and after every use Before first use and immediately after use
Note DO NOT iron Disassemble all parts prior to cleaning
Pretreatment
Rinse the component in tap water at 22-40°C Rinse the components in tap water at 22-40°C
Manual Cleaning 1. Soak for 3 minutes in a mild detergent solution
(Cidezyme) at room temperature (>22°C). Using a
soft bristle brush, scrub the item submerged in the
cleaning solution during the 3 minutes
2. Wipe while rinsing for 5 minutes in a large volume of
water. Using a lint free towel or gauze, remove the
water in excess from the item
3. Inspect all surfaces and item features to ensure that it
is visibly clean, repeat Manual Cleaning if not
1. Soak for 3 minutes in a mild detergent solution
(Cidezyme) at room temperature (>22°C). Using a
soft bristle brush, scrub the item submerged in the
cleaning solution during the 3 minutes
2. Wipe while rinsing for 5 minutes in a large volume of
water. Using a lint free towel or gauze, remove the
water in excess from the item
3. Inspect all surfaces and item features to ensure that it
is visibly clean, repeat Manual Cleaning if not
Disinfection
1. Soak the component in disinfectant (Cidex OPA) at
room temperature (>22°C) for 12 minutes
2. Rinse three (3) times in a large volume of water for at
least 3-minutes for each rinsing cycle
3. Lay flat to Air dry
1. Soak the component in disinfectant (Cidex OPA) at
room temperature (>22°C) for 12 minutes
2. Rinse three (3) times in a large volume of water for at
least 3-minutes for each rinsing cycle
3. Air dry
Cleaning Time
30 minutes 30 minutes
Drying Time
3-4 hours 30 minutes