Cosasco Checkmate DL, Справочное руководство

Страница: 54 / 71

46 INITIALIZING CHECKMATE™ DL FOR MICROCOR SYSTEMS
NOTE: The time protocol is based on the military 24 hour clock, where
00:00 hours denote midnight at the start of the day, and 12:00 is
noon.
NOTE: It is required to set the correct DAYLIGHT or STANDARD time
zone into the Checkmate DL to accurately Date and Time stamp
Data Logger readings. Refer to the AVAILABLE MEMORY SPACE
AND STANDARD TIME ZONE section for more details.
Clearing the Checkmate DL Memory
Normally it will not be necessary to clear the memory on the Checkmate
DL unless extraneous entries have been made, for example, when initially
experimenting with the system. However, when the equipment is to be
transferred to a new location, then it is recommended to clear the memory to
avoid confusion with any previously collected data.
NOTE: All data stored in internal memory of the Checkmate DL will
be erased permanently when switching between Microcor and
Corrdata Systems. Make sure to transfer stored data to the PC
prior to changing the data collection system.
To clear the memory, from the Standby display, press Mate (F4) then select
Clear Mate (F1) from the Mate Functions display shown below:
Mate Functions
Clear Set Mate
Mate Clock Type Exit
Press OK (F1) to proceed to clear the memory.