Cosasco Checkmate DL, Справочное руководство

Страница: 53 / 71

CHECKMATE™ DL 45
Initializing Checkmate
DL for Microcor Systems CHAPTER 10
Con fi guring Checkmate DL for Microcor Systems
If the Checkmate DL is programmed for the Corrdata System, it can be easily
changed to the Microcor System as described below.
WARNING! When switching Checkmate DL between Microcor and
Corrdata Systems, all stored data will be erased! Be sure to
transfer all stored data to the PC prior to changing the data
collection system (see appropriate chapters for more details
on data transfer).
From the Standby display, press Setup (F4) then select Mate Type (F3) from the
Con fi guration Options display. Press Yes (F1) to change the Checkmate DL
FROM Corrdata technology to Microcor technology.
Setting the Time and Date
The Checkmate DL has its own internal clock so that individual probe readings
are automatically time and date stamped.
To set the Time and Date, from the Standby display, press Mate (F4) and then
select Set Clock (F2) from the Mate Functions display to proceed to the Mate
Clock display shown below:
Mate Clock Set to
MMM DD, YYYY
HH:MM:SS
Read Set Exit
Press Set (F2) to proceed to the Set Mate Date & Time display:
Set Mate Date and Time
YYMMDDHHMMSS
> <
Enter Clr BkSp Exit
Using the keyboard, enter the last two digits of the year followed by the two digit
number of the month, date, the time in hours, minutes and seconds (enter 00 for
seconds for convenience). When the time is set correctly, press
Enter (F1) to
start the clock. To update the clock on the Mate Clock Set To display, press Read
(F1) . This will show the updated real time. Press Exit (F4) to proceed to the Mate
Functions screen. Press Exit (F4) again to return to the Standby screen.