Coronis MDCC 2121, Руководство по началу работы

Страница: 9 / 94

FCC compliance information
9
FCC Compliance Information (display controller)
CLASS B:
This Barco Graphics Controller complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with manufacturer’s instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Re-orient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
1. This device may not cause harmful interference, and
2. this device must accept any interference received, including
interference that may cause undesired operation.
The use of shielded cables for connection of the monitor to the
graphics card is required to ensure compliance with FCC regula-
tions. Changes or modifications to this unit not expressly
approved by Barco could void the user’s authority to operate this
equipment.