Coronis MDCC 2121, Руководство по началу работы

Страница: 62 / 94

Driver and Software Installation
62
Figure 32: Command line installation
Note:
When performing an MXRT driver upgrade, it is essential
to uninstall the previous installation before installing the new
driver. We also recommend that you perfrom the following steps
to completely remove the previously installed files:
a)
Boot the system in safe mode.
b)
Run MXRT driver cleaner.bat by double clicking on it (this
will either be installed as an icon on your desktop, or can
be found on the Barco Display System installation CD at:
drivers\2KXP\ATI
). This will remove all the previous
installed MXRT driver files.
c)
Reboot the system in regular mode and install the new
driver.
Installing the B
ARCO
M
ED
C
ORONIS
or Nio drivers
and software
Note:
The installation dialog will display in English if your
operating system’s language is not supported.
This process applies to the following versions of Windows:
• Windows 2000 Professional,
• Windows XP Professional,
• Windows XP Professional x64 Edition,
• Windows Server 2003,