Coronis MDCC 2121, Руководство по началу работы

Страница: 24 / 94

Display Controller Installation
24
Figure 1: Display controller VGA Jumper, VGA enabled
Note:
To use multiple BarcoMed display controllers in a single
computer, you need to enable VGA on only ONE of the BarcoMed
display controllers and disable VGA on ALL the other BarcoMed
display controllers. To use a BarcoMed display controller with a
third party VGA controller or with one or more Barco MXRT
display controllers, do
NOT
enable VGA on the BarcoMed display
controller.
Which PCI/PCIe slot to use
The table on the preceding page lists the different display controller
model(s) available for your B
ARCO
C
ORONIS
Display System and the
recommended PCI/PCIe slot to use for optimum performance. Figure
2 shows the different types of PCIe slots that can be used.
Figure 2: Examples of PCIe slots
Figure 3 shows the two different types of PCI slots that can be used.
Figure 3: Examples of PCI slots
- x16 slot
- x8 slot
- x1 slot