Coronis MDCC 2121, Руководство по началу работы

Страница: 26 / 94

Display Controller Installation
26
7.
Align the display controller(s) for your B
ARCO
C
ORONIS
Display
System with the slot(s) and press it(them) in firmly until the
card(s) is(are) fully seated.
Note:
The next step applies only to the MXRT 5100, MXRT
7100, and MXRT 7200.
8.
Connect the power cable(s) to the 6-pin power connection(s) on
the graphics card. Make sure the cables are not interfering with
anything inside the computer (for example, a cooling fan).
Figure 4: Power connection for the MXRT 5100, 7100, & 7300 controllers
Figure 5: Power connection for the MXRT 7200 controller
6-pin graphics controller
power cable
6-pin graphic controller
power cables - connect
2 cables as shown