17
16
14. Equipment Disposal
According to Directive 2012/19/EU of the European Parliament and Council of
4 July 2012 on waste electrical and electronic equipment (WEEE), the Corning®
MicroDEN® unit is marked with the crossed-out wheeled bin and must not be
disposed of with domestic waste.
Consequently, the purchaser shall follow instructions for reuse and recycling of
waste electronic and electrical equipment (WEEE) provided with the product and
available at www.corning.com/weee.
13. Limited Warranty
Corning Incorporated (Corning) warrants that this product will be free from
defects in material and workmanship for a period of one (1) year from date of
purchase. CORNING DISCLAIMS ALL OTHER WARRANTIES WHETHER EXPRESSED
OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR
OF FITNESS FOR A PARTICULAR PURPOSE. Corning’s sole obligation shall be to
repair or replace, at its option, any product or part thereof that proves defective
in material or workmanship within the warranty period, provided the purchaser
notifies Corning of any such defect. Corning is not liable for any incidental or
consequential damages, commercial loss or any other damages from the use of
this product.
This warranty is valid only if the product is used for its intended purpose
and within the guidelines specified in the supplied instruction manual. This
warranty does not cover damage caused by accident, neglect, misuse, improper
service, natural forces or other causes not arising from defects in original
material or workmanship. This warranty does not cover motor brushes, fuses,
light bulbs, batteries or damage to paint or finish. Claims for transit damage
should be filed with the transportation carrier.
In the event this product fails within the specified period of time because of
a defect in material or workmanship, contact Corning Customer Service at:
USA/Canada 1.800.492.1110, outside the U.S. +1.978.442.2200, visit
www.corning.com/lifesciences
, or contact your local support office.
Corning’s Customer Service team will help arrange local service where available
or coordinate a return authorization number and shipping instructions.
Products received without proper authorization will be returned. All items
returned for service should be sent postage prepaid in the original packaging or
other suitable carton, padded to avoid damage. Corning will not be responsible
for damage incurred by improper packaging. Corning may elect for onsite
service for larger equipment.
Some states do not allow limitation on the length of implied warranties or the
exclusion or limitation of incidental or consequential damages. This warranty
gives you specific legal rights. You may have other rights which vary from state
to state.
No individual may accept for, or on behalf of Corning, any other obligation of
liability, or extend the period of this warranty.
For your reference, make a note of the serial and model number, date of
purchase, and supplier here.
Serial No. ___________________________ Date Purchased _________________________
Model No. ___________________________________________________________________
Supplier _____________________________________________________________________
