Viper Installation, Service & Decommissioning Manual
© 2022, Marmon Foodservice Technologies Inc.
- 27 -
Publication Number: 620073146SER
NOTE: Setting the wake up time ahead of the sleep time on a given day causes the unit to go into the sleep mode for a
week unless the operator initiates a manual wake up.
Table 16.
Step
Action
Procedure
1
Set sleep and wake up
times
Open the Events Setup menu, shown in Figure 23.
by pressing the GO button.
2
Select DAY
Use the up and down arrows to highlight DAY.
3
Set DAY
Use the + or - buttons at the bottom of the display
to set the desired day or all days.
4
Select SLEEP
Use the up and down arrows to highlight SLEEP.
5
Set hour field
Use the left and right arrows to select the hour
field.
6
Set minute field
Use the left and right arrows to select the minute
field.
7
Select AM/PM field
If the 12 hour clock option is selected, use the left
and right arrows to select the AM/PM field.
8
Select DAY for Wake up
Repeat Steps 1 through 3.
9
Select WAKEUP
Use the up and down arrows to highlight WAKEUP
and repeat Steps 6 through 8 to set the WAKEUP
times.
10
Set Wake up day/time
Repeat Steps 5 through 7.
11
Save the WAKEUP set-
ting
Press the BACK button at the bottom of the display
to save the wake up setting.
When the sleep and wake up settings are complete, press the BACK button to save the settings and return to the Select menu, shown in
Figure 19.
Setting Viscosity
The viscosity maintained in the freeze barrels depends on the type of product being served. Some products are served best at a higher
viscosity, while others require a lower viscosity for best quality. The Viscosity menu allows the user to adjust the viscosity in each barrel
to the optimum setting for each type of syrup.
Refer to for Table 20. recommended settings based on syrup type.
Table 17.
Step
Action
Procedure
1
Set viscosity range
From the Setup menu (Figure 19.), open the Vis-
cosity Setup menu, shown in Figure 24..
2
Select barrel
Use the up and down arrows to highlight the
desired barrel.
3
Set range
Use the + or - buttons at the bottom of the display
to set the desired range.
4
Select barrel
Repeat Steps 2 and 3 for each barrel in the
machine.
To set all barrels in the system to the same viscosity setting, follow Table 17., and then press the ALL button at the bottom of the display
while highlighting the viscosity setting you desire for all the barrels.
Содержание R-454C
Страница 111: ...Cornelius Inc www cornelius com...
