Corghi ERCO 630 Series, Руководство оператора

Страница: 119 / 324

119
8.2 Vehicle preparation
It is possible to access the lift with the vehicle from both sides.
Place the vehicle at the centre of the platform and adjust the telescopic extensions (if
provided).
Place blocks at the positions indicated by the motor vehicle
’
s manufacturer for lifting.
8.3 Lifting
Turn the main switch (10) to position 1 and press up button to lift the vehicle to the required
level.
8.4 Standing
LIFT WITHOUT MECHANICAL SAFETY DEVICES
To stop the lift in standing position, release the up button when the required position is
reached.
Movement stops automatically.
8.4.1 Standing
LIFT WITH MECHANICAL SAFETY DEVICES
To stop the lift in standing position, release the up button when the required position is
reached.
Movement stops automatically.
SAFETY LOCK: Press the green safety lock button to lower the lift until it engages the
mechanical safety device.
8.5 Lowering
LIFT WITHOUT MECHANICAL SAFETY DEVICES
To lower the lift, press and hold the down button.
The lift will lower, under its own weight and the vehicle
’
s one, up to the safety height of
approx. 420 mm.
Make sure that the safety area is free, then activate the end of travel button.
Note: with lift without load, it is possible that - as a result of a
larger quantity of oil in the hydraulic circuit due to hydraulic
needs for the up movement - the lift does not lower or stops
before detecting the safety height limit switch