ElectroLynx® is a registered trademark of ASSA ABLOY Inc.
Copyright © 2014 Corbin Russwin, Inc. All rights reserved.
Reproduction in whole or in part without the express written
permission of Corbin Russwin, Inc. is prohibited.
®
ASSA ABLOY
12
4) Installation Instructions
Battery Polarity
Tabs
Retaining Slots
Security Screw
Battery Keeper
Bottom Tabs
Top Tab
Battery Installation
1. Remove battery keeper by lifting top tab and pulling away from the unit.
2. Install (6) AA Batteries into controller compartment being careful to align +/- polarity properly.
3. Install battery keeper by first inserting bottom tabs in bottom slots of controller. Lift the top tab over
batteries and snap into position.
4. Attach battery cover to inside controller escutcheon making sure to line up tabs with retaining slots
in battery cover. Secure with security screw using security T20 bit.
T20 Bit
TEST
FOR PROPER
OPERATION
BEFORE
CLOSING
DOOR
C A U T I O N
DOOR MUST REMAIN OPEN
DURING INSTALLATION.
USE DOOR STOP.
8
