ElectroLynx® is a registered trademark of ASSA ABLOY Inc.
Copyright © 2014 Corbin Russwin, Inc. All rights reserved.
Reproduction in whole or in part without the express written
permission of Corbin Russwin, Inc. is prohibited.
®
ASSA ABLOY
7
Lock Assembly Instructions
Align bevel accordingly. Engage 7/64 Allen wrench onto cap screw required for Step 5:3 on page 8.
Feed connector and wires through non cylinder side of door. Insert lock body into mortise cutout in door
and hold loosely in place with (2) #12x1" lock body screws.
4
(2) #12x1"
Combination Screws
Feed conn
s
through non-cyl
r side
Lock Body
7/64 Allen Wrench
Inside
of Door
ector & wire
inde
4) Installation Instructions
