The OTS lock can be installed in lockers up to 20 mm thick.
The assembly of the lock in the locker door must be correctly carried out to ensure the correct operation of the lock.
The position of the fi xing holes and the distance from the lock to the locker body, as shown in fi gures 1.2 and 1.3, must be correctly carried out to
prevent the knob from seizing up and the tab from being blocked.
If the tab becomes blocked due to incorrect installation, it can be unblocked by pressing the door inwards and pulling the knob outwards.
O
TS
®
ADVANCE
ASSEMBLY INSTRUCTIONS
TECHNICAL DRAWINGS
OTS LOCK INSTALLATION AND ASSEMBLY
O
TS
®
RFID LOCK
E-30
6,2
Ø
23
35
14
5
22,4
Ø
41,3
30
93,5
93,5
11,33
118
8
109,5
51,6
25,5
15
