background image

ElectroLynx® is a registered trademark of ASSA ABLOY Inc.

Copyright © 2014 Corbin Russwin, Inc. All rights reserved.

Reproduction in whole or in part without the express written 

permission of Corbin Russwin, Inc. is prohibited.

 

®

ASSA ABLOY

3

  General Description 

The Access 800 Mortise Lock is designed for areas which require stand-alone authorized entry.
It is a self-contained microprocessor-controlled keypad with non-volatile memory. The keypad
will hold a total of 100 (M800) or 2000 (M801, M802, M803, M804, M805, M806) different user
codes. User codes “01”, “02” and “03” are utilized for Master, Emergency and Supervisory
Codes respectively. This product is operated by six (6) “AA” alkaline batteries. Corbin Russwin
locks are designed with quality components to provide high security, performance and
durability. 

  Specifications  

• Latch - Stainless steel 

• Locking side controlled by any combination of 

• Deadbolt - Stainless steel 

keypad, proximity RF technology or key overide 

• Auxiliary Latch - Stainless steel, non handed  • Non-locking side retracts latch and deadbolt  
• Handed - Easily field reversible without

 • Locks furnished for 1-3/4" doors. Can be 

  disassembling the lock body

furnished for other door sizes upon request. 

• Case - 12 gauge heavy duty wrought steel

Consult factory

• U.L. Listed (3 hr.)  

  Features 

• Low battery alert–4 chirps after standard  

• Operates utilizing any two to six digits per 

  user code entry

code. Digits may be repeated and codes

• External remote “request to enter” connector   may start with zero.
• Master, Emergency or Supervisory code will  • Entry of a programmable number of wrong
  unlock door when low battery has expired

  User Codes disables all codes for a 

• Programming done at the keypad (Except

programmable number of seconds 

  M802 & M805) or with a PDA using

Yellow LED on solid

  Accessware™ with Access HH application
  Software.

 • M800 allows last 15 transactions to be

  • M801 - M806 allows last 2000 transactions        

  to be output to a PC via a PDA and
  Accessware™ software 

2) General Descriptions/ Specifications/ Features

output to portable printer via infrared link

Содержание ASSA ABLOY Access800





















Отзывы: