3 4
GB
Before operating the chair for the first time, the following points must be observed:
• Check that the chair has been set up in accor-
dance with the above regulations.
• Make sure that moving components can move
freely in the spaces required.
• Make sure that the mains plug is plugged in
and the power supply is established.
• Check the functionality of the control panel.
• Make sure that the battery is sufficiently
charged before using it (min. charging time
12 hours).
7 Operation
7.1 Operating modes
7.1.1 „Off“ operating mode
7.1.2 „Jog“ operating mode
To operate the chair, two possible operating modes are available:
• „Off“ operating mode
(machine in sleep mode)
• „Jog“ operating mode
(jog mode)
In the „Off“ operating mode, the machine is in sleep mode.
As long as the button on the control panel is pressed, the chair moves to the corresponding
position.
Warning!
Despite the sleep mode, the machine is not energy-free.
Switch off the chair via the mains plug before starting repair work.
In addition, dissipate any residual energy or stored energy!
After switching off the chair via the mains plug, you should not reconnect the
mains plug for at least 60 seconds.
