3
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the following:
1. READ ALL INSTRUCTIONS.
2. Do not touch hot surfaces. Use handles or knobs.
3. To protect against electrical shock, do not immerse cord, plugs or appliance in water or other liquid.
4. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
5. Close supervision is necessary when any appliance is used by or near children.
6. Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
7. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in
any manner. Bring it to a qualified technician for examination, repair or electrical or mechanical adjustment.
8. The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
9. Do not use outdoors.
10. Do not let cord hang over edge of table or counter, or touch hot surfaces.
11. Do not place on or near a hot gas or electric burner, or in a heated oven.
12. Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
CAUTION: To protect against damage or electric shock, do not cook in the base unit. Cook only in the cooking pot provided.
13. Always attach plug to appliance first, then plug cord into the wall outlet
14 To disconnect, press WARM/CANCEL, then remove plug from wall outlet.
14. Do not use appliance for other than intended use.
15. Do not use aluminum cover or cooking pot if dented or worn.
WARNING: Never deep-fry or pressure-fry in the Multi Cooker, regardless of whether the lid is on or off. THIS IS
DANGEROUS, AND CAN CAUSE A FIRE AND SERIOUS DAMAGE.
SO-315533_22276_COOKS_6qt FastPot Multi Cooker_IM_R10.indd 3
2018-08-14 10:08 AM