Convision M1600, Руководство пользователя, Страница: 91 / 159

87
z
Step 1 Duration Time: Set the duration that event picture stays in the Main or
Quad monitors.
z
Step 2: Click any Monitor tab (Main Monitor or 1th~4th Quad Monitors).
z
Step 3: Select the DI (Alarm Input) device that will trigger camera with Call
monitor function. Each row in the “DI->Call Monitor” menu represents one DI
(Alarm Input) device and each column shows one camera. Click any row in the
menu to select DI (Alarm Input) device and tick the square icons in each column to
select the cameras to be popped up in Main monitor or Quad monitors.
z
Step 4: Click “OK” tab when you have done the setting.
z
Step 5: Besides the setting in this menu, you should have further configurations of
DI (Alarm Input) device to let this function work. . Please refer to Chapter 5-4-2
about setting of DI (Alarm Input) device
!
Note
1. When many events occur at the same time, the Main/Quad monitors
will pop up a camera’s image in full screen. The popping camera is
chosen by the number of the camera, for example camera 1 be
selected firstly, then camera 2 and etc.
2.
In the same condition, if the camera 1 has been popped up last time,
the next time popping camera’s image can’t be the image of camera 1.
(4-10) Cam Motion DO
When selected camera detects motion, selected DO can be triggered and start to send
control signal to the external device (e.g., alarm) within the DO duration. The
“Camera/DO array” below the setting allow you to relate the DO devices corresponding