Convision M1600, Руководство пользователя, Страница: 19 / 159

15
any channel to enlarge the screen picture by two steps and click it again to back to the original
split style. The order of cameras displayed on each split style can be configured in the system
setting menu.
3-1-2 Sequencer
This DVR provides three types of sequencer styles including 1, 4 and 16. Just click one of the
Sequence styles and it will display camera screen in sequence. You can set up the “Sequencer
Order” and the “Sequencer Duration” in the “Display Setting” menu. Please refer to the Chapter
5-2-1 Sequencer.
3-1-3 Event to Zoom
There are two types of Events to trigger camera zooming. One is Motion event and the other
one is Alarm event.
If you want to enable this function, firstly you should go to Setup> “Alarm” menu to set up
“Motion to Zoom” or “Alarm (DI) to Zoom” Rule. Please refer to “Chapter 5-4 Alarm”.
Click Event to Zoom icon in the Control Window to switch to “Event to Zoom” display
style.
3-1-3-1 Rule of Event Zooming
(1). When the DVR detects motion or alarm on the channel set with Motion to Zoom or Event to
Zoom, it will immediately pop up this channel picture to the “ Zoom-in Window ” and the
original position of that channel will be replaced with a “ Motion/Alarm” legend and marked
with a red frame.
Any channel without set with “ Motion/Alarm to Zoom” function will not be popped up to the
“ Zoom-in Window ” or marked in red frame even DVR detects motion or alarm in this channel.
(2). If DVR doesn’t detect any other motion or alarm, the current zooming channel will be