Convision M1600, Руководство пользователя, Страница: 68 / 159

64
z
Events (Motion/DI): Set up the Motion or DI (Alarm) event to trigger DVR
recording.
z
Event Occur: Set up recording frame rate when event occurs.
z
No Event: Set up recording frame rate when there is no event. There are two options
for selection. One is “Recording by Low Frame Rate “ and the other one is
“Pre/Post-Recording”. For the Pre-Recording setting (0~20 seconds) is to record a
certain seconds before an alarm happens. And Post-Record setting (0~600 seconds) is
to record a certain seconds after an alarm happens.
If you select “Full Recording” in “Recording Mode” at previous step, it will pop up the Full
Recording setting menu as below.
You can set the recording frame rate of fully recording from 1, 2, 3, 4, 5, 6, 7, 8, 10, 12,
15, 20, 25 to max. The higher the number is, the higher frame rate it will be recorded.
However, with higher frame rate, the hard disk space will be consumed faster.
(2) Schedule Type-Routine:
If you select “ Routine” as recording type, you can set recording schedule by the unit of day
and DVR will repeat the same recording type during the period you select.