Convision M1600, Руководство пользователя

Страница: 62 / 159

58
5-1- 2 Detection
Click “ Detection” Tab to go to configurations of camera motion and mask detection.
(1) Camera Mask Detection : If you enable Camera Mask Detection function, it will show
“Masking” warning message in the camera channel and will record it as a log when DVR
detect camera that is masked.
z
Sensitivity (10/20/30/40/50/60/70/80/90/100): You can set the sensitivity of camera
mask detection from 10 to 100.
(2) Camera Motion Detection : Set the Motion Sensitivity and Motion Detection Area
z
Sensitivity (10/20/30/40/50/60/70/80/90/100): You can set the sensitivity of motion
detection during recording. It is recommended to adjust the setting to 100 in order to
prevent any data loss. However, in some special conditions, the system continues to
record even when no motion has occurred. This will result in a considerable amount of
useless data being recorded. In such a case, it is recommended to lower the sensitivity
setting to avoid wasting hard disk.
z
Motion Detection Area : This is used to set the motion detection area.
The default setting of “ Motion Detection Ares” is “Set All”. You can have
Method #1 Under “Full Motion Detection Area”
‹
Select “ Clear” option in selection bar.