Convision M1600 Скачать руководство пользователя страница 14

Страница: 14 / 159

Note

RAID and Hot spare can’t be selected in the same channel (HDD).

Only one hot spare HDD can be selected.

It’s meaningless to select Hot spare in RAID Level 0

(6) Step 6: Select RAID Level

New M-series support RAID 0~5 levels. Below please see the comparison between RAID

0, 0+1, 3 and 5. With properly configured, the RAID can provide non-stop service with

high degree of fault tolerance. The RAID function allows two HDD failures without

impact on the existing data stored in the HDD and failed drive data can be reconstructed

from the remaining data and parity drives. Please have the proper configuration according

to your requirement.

RAID

Level

Description Min

Drives

Max.

Drives

Data Reliability

Also known as stripping.

Data distributed across multiple drives in

the array.

There is no data protection

1 5

No data protection

Also known as mirroring

All data replicated on N separated disk. N

is always 2.

There is a high availability solution but

due to the 100% duplication, it is also a

costly solution.

2 2

High than RAID 3, 5.

Also known Bit-Interleaved parity.

Data and parity information is subdivided

and distributed across all disk.

3 5

*Lower than RAID 1.

*High than a single

drive

Содержание M1600
































































































































































Результаты поиска

Содержание M1600

Отзывы:

Convision M1600, Руководство пользователя, Страница: 14 / 159

Результаты поиска

Содержание M1600

Отзывы: