manualshive.com logo in svg

CONVEY-ALL 1214-GN, Руководство оператора

Поделиться
Скачать
CONVEY-ALL 1214-GN Скачать руководство пользователя страница 7

1-1

Revised 02.2021

Operator’s Manual: Transfer Conveyor

Fig 1 - Serial number location

Section 1: INTRODUCTION

Congratulations on your choice of a Convey-All™ Transfer Conveyor. It is designed to efficiently move 
grain, pulse crops or granular material between a truck, trailer, storage facility and another conveyor.

Convey-All™ is a member of the Meridian Manufacturing Inc. family. The equipment we design and 
manufacture meet the exacting standards of the agricultural industry.

Keep this manual handy for frequent reference and pass it on to new operators or owners. Call your 
dealer, distributor or Meridian Manufacturing Inc., if you need assistance, information, additional/
replacement copies, or a digital copy of this document.

Information provided herein is of a descriptive nature. Meridian Manufacturing Inc. reserves the right to 
modify the machinery design and specifications provided herein without any preliminary notice.

Performance quality may depend on the material being handled, weather conditions and other factors.

1.1  OPERATOR ORIENTATION

The directions left, right, front and rear, as mentioned throughout this manual, are as seen from the tow 
vehicle driver’s seat and facing the direction of travel. The hopper is the front of the conveyor.

1.2  SERIAL NUMBER LOCATION

Always give your dealer the serial number when 
ordering parts, requesting service or asking for 
other information. The conveyor’s serial number 
is located at the hopper.

Use the space provided for easy reference:

 Conveyor Model No: _______________________

 Conveyor Serial No:  _______________________

Engine Model No:  _________________________

Engine Serial No: __________________________

Содержание 1214-GN

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды