manualshive.com logo in svg

CONVEY-ALL 1214-GN, Руководство оператора

Поделиться
Скачать
CONVEY-ALL 1214-GN Скачать руководство пользователя страница 38

4-4

Revised 02.2021

Operator’s Manual: Transfer Conveyor

4.2.2  Every 50 Hours or Weekly:

7. Check the conveyor belt tension.

Watch  the tension more often while
breaking-in the conveyor, because the belt
may stretch. Refer to Section 4.3.1

Note:

A properly tensioned belt will not slip

when in operation.

8. Check the conveyor belt alignment.

- How the belt is aligned to the rollers must

be checked at the hopper, transition, at the
drive box and the discharge.

Watch the alignment more frequently during 
the first 10 hours of operation. It usually 
seats itself and can be checked weekly after 
that. Refer to Section 4.3.2

9. Check the condition of the rubber, hopper

flashing. Be sure it still seals the hopper to
prevent leaking.

If  any product comes out of the hopper
around the flashing, loosen flashing mounting 
screws and adjust. Retighten anchor screws
and try running the conveyor again. Repeat
until no grain is lost.

If the flashing is stuck to the belt, manually
peel the flashing up and off the hopper.
Replace it if necessary.

Hydraulic Motor Units:

10. Inspect the coupler between the hydraulic

motor and drive roller for wear.

11. Oil hydraulic drive coupler or chain.

Fig 39 - Hopper roller bearing

Fig 40 - Hopper flashing

Fig 41 - Hydraulic drive

Содержание 1214-GN

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды