manualshive.com logo in svg

CONVEY-ALL 1214-GN, Руководство оператора

Поделиться
Скачать
CONVEY-ALL 1214-GN Скачать руководство пользователя страница 19

3-1

Revised 02.2021

Operator’s Manual: Transfer Conveyor

Section 3: OPERATION

• Read and understand the Operator’s Manual, 

and all safety decals, before using.

• Stop the engine. Place all controls in neutral,

remove ignition key and wait for all moving
parts to stop before servicing, adjusting, or
repairing or unplugging.

• Clear the area of bystanders, especially

children, before starting.

• Keep working area clean and free of debris

to prevent slipping or tripping.

• Keep hands, feet, hair and clothing away

from all moving and/or rotating parts.

• Do not allow riders on the conveyor when

driving mover kit.

• Do not operate conveyor with guards

removed.

• Chock wheels of conveyor before starting.

• Be familiar with machine hazard area. If

anyone enters hazard areas, shut down
machine immediately. Clear area before
restarting.

• Establish a lock-out, tag-out policy for the

work site. Be sure all personnel are trained in
and follow all procedures. Lock-out tag-out
all power sources before servicing the unit.

The Convey-All™ Transfer conveyor is designed to efficiently move grain, pulse crops, or granular 
material from under a truck, railcar or storage facility to another conveyor. Power is provided by a gas 
engine, electric or hydraulic motor.

It is the responsibility of the owner and operators to read this manual and to train all personnel before 
they start working with the machine. Follow all safety instructions exactly - it is everyone’s business.
By following recommended procedure, a safe working environment is provided for the operator, co-
workers and bystanders in the area around the work site.

The design and configuration of this conveyor includes safety decals and equipment. Hazard controls and 
accident prevention are dependent upon the personnel operating and maintaining it. Their awareness, 
concern, prudence and proper training are crucial. 

Many features incorporated into this machine are the result of suggestions made by customers like you. 

By following the operating instructions, in conjunction with a good maintenance program, your Truck 
Load conveyor will provide many years of trouble free service.

Содержание 1214-GN

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды