CONVEY-ALL 1214-GN, Руководство оператора

Страница: 24 / 56

3-6 Revised 02.2021
Operator’s Manual: Transfer Conveyor
Goose Neck (GN) Hopper (Optional):
This hopper contains hold-down wheels inside
the transition housing between the hopper and
tube.
UNEXPECTED MOVEMENT
Do not release Hopper Winch handle when
ratchet lever is in unlocked position,
with load on winch.
Handle could spin violently causing injury.
Hopper Winch:
Use the winch to raise and lower the hopper
frame or the railcar hopper side panels.
Fig 14 - Railcar winch
Fig 15 - Frame adjustment
Fig 16 - Discharge hood adjustments
Fig 13 - Goose neck hopper
Frame Height/Angle:
The unit is designed with an adjustable wheel
frame that can be used to set the frame angle or
discharge height.
Set at the height appropriate for your application.
Keep the angle as low as possible to insure that
the conveying capacity is at the maximum.
To change the balance of the machine for moving
around the yard; loosen the clamp around the
tube. Slide or tap the undercarriage to adjust
its position along the tube. Tighten the clamp
again.
Discharge Hood:
The Discharge Hood is designed with brackets
that allow it to tilt or be removed. This will
facilitate throwing material at a different angles
from the end of the machine. Set the hood
appropriately for the application.