manualshive.com logo in svg

CONVEY-ALL 1214-GN, Руководство оператора

Поделиться
Скачать
CONVEY-ALL 1214-GN Скачать руководство пользователя страница 21

3-3

Revised 02.2019

Operator’s Manual: Transfer Conveyor

3.2  COMPONENTS AND CONTROLS

Before starting to work, all operators should 
familiarize themselves with the location and 
function of the components and controls on 
your specific unit.

Options and location may vary depending on 
model.

Gas Engine:

Read the engine manufacturer’s manual for 
more detailed instructions.

a. Ignition Switch:

This switch controls the power to the engine
electrical system. Turn clockwise to start,
vertical position is ON.
Turn the key counterclockwise to turn OFF.

b. Circuit Protector:

This protector monitors the engine electrical
circuit. Its LED will illuminate when the circuit
exceeds its preset value and trip the breaker.
Depress indicator to reset the breaker and
the light will go out.

c. Engine Mount Lever:

This  lever sets the position of the engine
mount.

Move the lever to slide the engine base away
from the drive pulley, disengaging the belt.

IMPORTANT:

Always disengage drive belt before

starting or stopping engine.

Move the lever again, to engage drive belt. 
Set the belt tension so the belt does not slip 
during operation.

Fig 4 - Gas engine with electric start

Fig 5 - Gas engine

a

d

b

b

c

d. Choke:

This lever controls the position of the choke.
Slide the lever to the left to close the choke
valve for starting when the engine is cold.
Slide to the right to open the choke as the
engine warms.

Always open the choke fully when operating
the machine.

Содержание 1214-GN

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды