manualshive.com logo in svg

CONVEY-ALL 1214-GN, Руководство оператора

Поделиться
Скачать
CONVEY-ALL 1214-GN Скачать руководство пользователя страница 30

3-12

01.2015

Operator’s Manual: Transfer Conveyor

3.7.5  Unplugging:

In unusual moisture, crop or material conditions, 
the machine can plug. When unplugging, follow 
this procedure:

1. Place all controls in neutral or off, stop

engine or motors and disable power source.

2. Remove the material from the discharge and

the intake area.

3. Reposition unit if discharge area plugs due

to lack of clearance.

4. Restart unit.

3.7.6  Hold Down Wheels on “GN” Models:

In situations where the conveying belt jams or is 
overtightened, the belt can come out from under 
the hold down wheels at the transition point. To 
correct situation:

1. Run until machine is empty or remove all

material from machine.

2. Turn engine or motor off and disable the

power source.

3. Move conveyor belt into its loosest position.

Refer to Section 4.3.1

4. Remove transition cover.

5. Push conveyor belt under hold down wheels.

6. Set tension and alignment. Refer to Section

4.3.1

7. Install and secure transition cover.

Fig 26 - Conveyor lacing

Fig 27 - Under discharge hood

Fig 28 - Transition cover

Fig 29 - Hold down wheel location

Содержание 1214-GN

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды